Tendy Style crankbrothers Highline 7 170 mm Dropper Post

crankbrothers Highline 7 170 mm dropper post – a premium product with maximum travel

The crankbrothers Highline 7 170 mm seatpost has the most travel of all Highline Vario-posts. It scores with its stepless adjustment, which is absolutely smooth and reliable. The quick return to the starting position and the uncomplicated setup also speak for themselves. The basis is a self-contained hydraulic IFP cartridge with two chambers and internal floating piston. Thanks to the 2-bolt clamp with quick release head, the saddle can be replaced quickly. The whole thing is rounded off by a Jagwire cable, Igus bearings and Trelleborg seals of the highest quality. With its remarkably low overall height, low weight and clean internal cable routing, the Highline 7 will delight the enduro, all-mountain and cross-country specialists of the world.

Specifications:

Application:

Enduro, All Mountain, Cross Country

Travel:

170 mm

Diameter:

30.9 mm, 31.6 mm

Length:

507 mm

Setback:

0 mm

Technical Information:

Actuation:

mechanical handlebar remote

Cable Routing:

internal

Clamp:

2-bolt

Compatible Saddle Rails:

7 x 7 mm (standard)

Material:

aluminium (7075-T6)

Approved For:

Insertion Depth (max.):

287 mm

Insertion Depth (min.):

100 mm

Features:

• lower insertion depth suitable for many frames
• premium seals by Trelleborg
• exclusive plain bearings by Igus
• Jagwire cable and cable housing
• encapsulated hydraulic cartridge (2 chambers: gas and oil separately) with internal floating piston
• internal cable routing
• cable actuated for easy installation
• linear actuator for quick return
• quill made of machine weight-reduced aluminium (10-15 g less than Highline 3)
• standard 2-bolt clamp w/ quick release
• 47 mm minimum construction height
• 377 mm maximum extension length
• 217 mm minimum extension length
• remote with especially flexible mount system available separately

Maintenance Intervals:
The maintenance intervals are dependent on riding style and the geography.
After every ride: Wipe dust and dirt from the seatpost, focusing on the seal area and the tip of the spring. Check the seatpost for any damage.
Every 150-175 hours of driving time: Lubricate the internal components by unscrewing the collar, use spring-specific grease (never oil!) up to the sleeve under the collar and reassemble. Check screw connections for the specified torques.
450+ hours riding time: Check seatpost and replace internal components if necessary.

Models:

30.9 mm / 507 mm / SB 0 mm:

Diameter:

30.9 mm

Length:

507 mm

Setback:

0 mm

Manufacturer Number:

16384

31.6 mm / 507 mm / SB 0 mm:

Diameter:

31.6 mm

Length:

507 mm

Setback:

0 mm

Manufacturer Number:

16385

Contents:

• 1 x crankbrothers Highline 7 170 mm dropper post
• 1 x Jagwire cable
• 1 x Jagwire cable housing

Order Together:

The remote kit is required for use.