High Quality Gates CDX 3-cam SureFit Shimano / SRAM Rear Belt Drive Sprocket

This Gates CDX rear belt drive sprocket for touring use has three SureFit™ cams, fits a belt line of 43.7 mm and is compatible with Shimano Alfine and Nexus mechanical gear hubs and SRAM internally geared hubs. The sprocket is made of stainless steel.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked E-bikes/pedelecs with pedal assistance.

Specifications:

Application:

City & Touring

Teeth:

22 t, 24 t, 26 t

Mount:

3-cam (3-lobe)

Technical Information:

Width of the teeth:

11 mm

Tooth division:

11 mm

Belt line:

43.7 mm

Mounting web thickness:

2.9 mm

Offset:

0.9 mm (assembly surface), -0.55 mm (centre line)

Material:

stainless steel

Compatibility:

• Shimano Alfine 8-speed SG-S7001-8
• Shimano Alfine 11-speed SG-S700
• Shimano Nexus 3-speed coaster brake SG-3C41
• Shimano Nexus 3-speed disc SG-3D55
• Shimano Nexus 7-speed roller brake SG-C3000-7R
• Shimano Nexus 7-speed coaster brake SG-C3000-7C
• Shimano Nexus 7-speed disc SG-C3001-7D
• Shimano Nexus 8-speed roller brake, rim brake SG-C6011-8R, SG-C6001-8R, SG-C6011-8V, SG-C6001-8V
• Shimano Nexus 8-speed coaster brake SG-C6001-8C
• Shimano Nexus 8-speed disc SG-C6001-8D, SG-C6001-8CD
• SRAM Automatix
• SRAM i-Motion 3

Note from the manufacturer:

For 22 t sprockets in all combinations with mechanical Nexus 8-speed internally geared hubs, a Right hand dust cap B for Inter-8 should be ordered as well.

Features:

• CDX level: high-end version for high loads and best performance
• suitable for mud, sand, snow and ice as well as all roads
• middle guide groove (CenterTrack)
• high mileage
• robust stainless steel
• SureFit pinion design: flexible interface for 3-cam flat, greater mounting tolerance

Technology:

Gates Carbon Drive System
The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, E-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubricant means no accumulation of grease and dirt.
Smooth and silent operation: no metal-to-metal contact of the chains.
Light: The whole system weighs less than a standard bicycle chain.
No elongation: Belt does not need to be re-tensioned or replaced.
Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants.
Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt.
Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework.

Models:

22 tooth:

Outer Diameter:

75.3 mm

Manufacturer Number:

CT1122XMN

24 tooth:

Outer Diameter:

82.3 mm

Manufacturer Number:

CT1124XMN

26 tooth:

Outer Diameter:

89.3 mm

Manufacturer Number:

CT1126XMN

Contents:

• 1 x Gates CDX SureFit 3-Cam Rear Belt Drive Sprocket

Order Together:

• SureFit assembly tool