Bestsellers Manitou Dorado Expert 27.5″ Suspension Fork

The Manitou Dorado Expert 27.5″ suspension fork with the characteristic Upside-Down construction is perfectly equipped for downhill use with its stiff 37 mm stanchion tubes and the revised TPC+ damping with adjustment of high and low speed compression stage.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

Downhill

Wheel Size:

27.5″

Suspension Type:

air

Travel:

203 mm

Steerer Tube:

1 1/8″

Axle Type:

thru-axle

Wheel Standard:

20 x 110 mm (Boost)

Brake Mount:

disc PM8 (direct mount 203 mm)

Technical Information:

Offset:

47 mm

Steerer Tube Length:

270 mm

Steerer Tube Diameter (Stem):

28.6 mm

Steerer Tube Diameter (Crown Race):

30 mm

Axle to Crown:

582 mm

Over Locknut Dimension:

110 mm

Stanchion Tube Diameter:

37 mm

Steerer Tube Material:

Aluminium

Crown Material:

Aluminium

Stanchion Tube Material:

aluminium (6000)

Lower Tube Material:

aluminium (6000)

Adjustment Options:

Compression:

High-Speed, Low-Speed

Rebound:

yes

Suspension Stiffness:

air pressure adjust

Remote:

no

Travel Adjustment:

yes, internal (180 mm, 190 mm)

Approved For:

Tyre Size (max.):

27.5 x 2.6″

Rotor Size (max.):

223 mm

Features:

• suitable for e-bikes
• Upside-Down design provides increased stiffness in the longitudinal direction with the same torsional stiffness, thus improved control in rough terrain
• constant lubrication of seals
• 37 mm chassis 20% stiffer than previous version
• balancing valve regulates air pressure in positive and negative air chambers during air filling
• Incremental Volume Adjust (IVA) for adjusting the volume in the positive air chamber
• TPC+ damping increases damping force deeper in the suspension travel
• hydraulic Bottom-Out protection
• consistent damping performance on long downhill runs
• TSR bleed screws for pressure compensation
• fork crown with 47 mm offset intended for 27.5″ tyres
• suspension travel internally adjustable (180 mm, 190 mm)
• with stone guard for the stanchion tubes

Manufacturer Number:

191-38304-A101

Contents:

• 1 x Manitou Dorado Expert 27.5″ suspension fork
• 1 x Manitou brake rotor adapter
• 1 x SAG measuring bar with 1 x brake hose guide and 2 x spacers (detachable)
• 8 x bolts
• 1 x Manitou decal set